Wheelchair & Disability Ramps in Perth: Local Guide to Costs, NDIS Funding & Installation

Ramp Options in Perth

• Portable ramps — Lightweight, foldable for single steps or vehicle access. $150–$800. Good for apartment dwellers and renters.
• Modular ramp systems — Pre-engineered sections for varying heights. $1,500–$8,000 installed. Best where permanent but non-destructive solutions are needed, such as heritage-listed homes.
• Permanent concrete ramps — Custom-built for long-term accessibility. $3,000–$10,000+. Requires council approval in some areas.

What Perth Homeowners Should Know

Many homes built before the 1990s in Subiaco, Claremont, and Nedlands have split-level layouts with 2-3 steps between living areas — an interior ramp or stairlift may suit better here. Sandy soils in coastal suburbs like Scarborough and Cottesloe require deeper footings for permanent ramps. Newer estates in Ellenbrook and Byford are built to modern accessibility standards, often needing only minor threshold ramps. The limestone retaining walls common in Perth hills suburbs can complicate ramp installation.

Local ramp installers across Perth are experienced with these conditions and can recommend the best solution for your home. Most offer a free site assessment to measure your access points and discuss options before quoting.

NDIS Funding for Ramps in Perth

The NDIS funds ramp installations across Perth when deemed reasonable and necessary through the home modification pathway. The standard process involves:

1. OT assessment — A local occupational therapist visits your Perth home to assess access barriers, measuring door widths, step heights, and pathway gradients.
2. Ramp recommendation — The OT specifies type, length, gradient, and handrail requirements per Australian Standard AS 1428.1 (Design for Access and Mobility).
3. NDIS quotes — Local registered ramp suppliers provide itemised quotes based on the OT specification.
4. Plan approval — Your support coordinator or plan manager submits the OT report and quotes through the NDIS portal. Processing times vary.

Important: NDIS funding for ramps is assessed individually. Factors include whether the ramp is a reasonable and necessary support, the participant's goals, and whether the solution offers value for money. Temporary ramps may be funded while awaiting permanent modifications.

Start with our full NDIS funding guide →

Australian Ramp Standards — What Applies in Perth

All ramp installations in Perth must comply with the National Construction Code and AS 1428.1. Key requirements:

• Max gradient 1:14 — 14 cm of ramp length per 1 cm of rise. A 30 cm step needs at least 4.2 m of ramp.
• Min width 1000 mm — Clear space between handrails for wheelchair passage.
• Handrails both sides — Required when the rise exceeds 190 mm, extending 300 mm past the ramp ends.
• Landings — Level rest platforms at the top, bottom, and every 9 m of continuous ramp.
• Non-slip surface — The ramp surface must provide adequate traction in wet conditions, which is especially relevant in Perth's climate.

Council regulations in Perth may add further requirements, particularly for heritage properties, strata schemes, or properties on the building covenant register.

Other Cities

We also cover Sydney, Melbourne, Brisbane, Perth, Adelaide, and Gold Coast.